Skip to main content

Hardware Configuration - Factory Reset - Fanvil

Factory Reset for Fanvil

Factory reset for latest firmware phones​

Hold down the OK button until the Factory Reset button appears then press OK to start reboot.

Factory reset from web interface​

From the web interface:

  1. Navigate System > Configurations.
  2. From reset phone section.
  3. Click Reset button.

Fanvil factory reset on bootup​

  1. Make sure your IP phone is completely turned off.
  2. Pres # Key.
  3. If you are using a X5S: press # after the Red Light blinks on Page-Switch key.
  4. If you are using other model than X5S: press # after the 2nd Red Light blinks on Power Indicator LED.
  5. You will then see the message “Post Mode” appears on your screen.
  6. Dial *#168
  7. After 5 seconds, you should see “Conf Reset” on your screen.
  8. Restart your IP phone and your phone will be reset to the factory settings.