Skip to main content

Hardware Configuration - Manual Configuration - Grandstream

GXP 1400​

grandstream-gxp1400-manual-a.png

Figure 54.1 GrandStream GXP 1400 manual configuration.
  1. Select Accounts.
  2. Select Account 1.
  3. Click Basic Settings.
  4. Select Active.
  5. Enter your SIP username into field (5).
  6. Enter your SIP domain into field (6).
  7. Enter your SIP password into field (7).
  8. Enter Identifier of Choice for account.
  9. Enter Voicemail number #445
  10. Click Save and Apply.

Call Settings​

grandstream-gxp1400-manual-b.png

Figure 54.2 GrandStream GXP 1400 manual configuration.
  1. Select Call Settings.
  2. Change Dialplan to { x+ | *x+| *x*x+ | *xx*x+ | *xxx*x+ | #xxx | #x+ | #x+* }
  3. Select No.
  4. Click Save and Apply.

BLF (Busy Lamp Field)​

Busy Lamp Field on the Grandstream monitors other extension and the current status for example when the extension is on a call.

The LED lights will change colour and state depending on the current status of the Phone.

Grandstream-GXP1630-BLF.png

Figure 54.3 GrandStream GXP 1400 BLF.
  1. Click Settings.
  2. Select Programmable Keys.
  3. Select Busy Lamp Field (BLF) form the drop down menu.
  4. Enter a description in this example it is the Extension number.
  5. Enter the 6 digit SIP User name of the Extension.
  6. Click Save and Apply.

Security Settings​

grandstream_security_settings.png

Figure 54.4 GrandStream Security Settings.

The following configuration will help to prevent Ghost Calls:

  1. Navigate to: Security Settings
  2. Set Validate Incoming Messages to Yes
  3. Set Check SIP User ID for Incoming Invite to Yes.
  4. Click Save

VoIP TLS/SRTP Encryptation setup​

Transport Layer Security (TLS) is a security protocol designed to facilitate privacy and data security encrypting voice traffic. To enalbe this feature follow steps bellow:

step 1 adjust transport protocol​

grandstream-manual-tls3.png

Figure 54.5 Yealink TLS
  1. Under Account x browse General Settings
  2. Include to SIP server port number 5061 eu.sip.ssl7.net:5061
  3. Under SIP Settings > Basic Settings Register
  4. Set transport protocol to TLS.
  5. Select SIP as SIP URI Scheme when using TLS.

Step 2. Set SRTP as compulsory​

grandstream-manual-srtp3.png

Figure 54.6 Grandstream SRTP
  1. Under Account x
  2. Browse Audio Settings.
  3. Set Enabled and Forced as SRTP Mode.
  4. Confirm changes.

GXV 3240​

grandstream_sip.png

Figure 54.7 GrandStream GXV 3240 manual configuration.

Navigate to General Settings->Account->Account 1 and fill as shown below:

  1. Put your account name into field number 1
  2. Enter your SIP domain into field number 2
  3. Enter your SIP username into field number 3
  4. Enter your SIP password into field number 4
  5. Enter Voicemail number #445 into field number 5
  6. Click Save

Call Settings​

grandstream_dialplan.png

Figure 54.8 GrandStream GXV 3240 Call Settings.

Go to Call settings and fill as shown below

  1. Put Dialpplan { x+ | *x+ | *xx*x+ | #xxx+ | #x+ | #x+* } into field number 1
  2. Make sure that "use # as Dial Key" is unmarked under field number 2
  3. Click Save

Codec Settings​

grandstream_codec.png

Figure 54.9 GrandStream GXV 3240 Codec configuration.

Navigate to Codec settings

  1. Put only PCMU and PCMA into selected codec field under point 1
  2. Click Save

DP715 DECT handset​

grandstream_general.png

Figure 54.10 GrandStream DP715 DECT manual configuration.
  1. From Profiles section (1).
  2. Select Profile 1.
  3. Edit General Settings (3) under profile 1.
  4. Set profile to Active
  5. Put your account name into field Profile Name
  6. Enter your SIP domain into field SIP Server
  7. Enter Voicemail number #445 into field number 7
  8. Click Save

grandstream_dect.png

Figure 54.11 GrandStream DP715 DECT manual configuration.
  1. Navigate to (1)DECT.
  2. Select SIP Account Settings.
  3. Enter your SIP username into field SIP User ID and Authenticate ID
  4. Enter your SIP password into field Password
  5. Put your account name into field Name
  6. Click Save

Call Settings​

grandstream_callsettings.png

Figure 54.12 GrandStream DP715 Call Settings.
  1. From Profiles section (1).
  2. Select Profile 1.
  3. Edit (3)Call Setting under profile 1.
  4. Put Dial plan { x+ | *x+ | *xx*x+ | #xxx+ | #x+ | #x+* } into field number 4.
  5. Make sure that "use # as Dial Key" is unmarked
  6. Click Save

Analogue adapter - ATA​

grandstream_ata.png

Figure 54.13 GrandStream ATA manual configuration.
  1. Navigate to corresponding FXS port you like to set up
  2. Set "Profile active" to YES
  3. Enter sip domain. Use eu.sip.ssl7.net or amn.sip.ssl7.net
  4. Adjust SIP transport protocol. Default is UDP use TCP if you are facing connectivity issues.
  5. Enter your SIP username into field SIP User ID and Authenticate ID
  6. Enter your SIP password into field Password
  7. (optional) Adjust Registration Expiration Timmer.
  8. Allow DTMF via RFC2833 and SIP INFO
  9. Change Dialplan to { x+ | *x+ | *xx*x+ | *xxx*x+ | #xxx+ | #x+ | #x+* }
  10. Click Update

Check Registration status​

grandstream_ata_registration.png

Figure 54.14 GrandStream ATA Registration status.
  1. Navigate to (1)Status
  2. Check if corresponding FXS port (2) is registered.