Hardware Configuration - Factory Reset - Cisco¶
SPAXXX
Figure 30.1 Cisco - Factory reset
Factory Reset for Cisco Phones (SPAXXX, CP-88XX and CP-78XX)
- Press
Settings
button in phone. - Scroll down.
- Press
Factory Reset
[Number 14] and pressenter
.
CP-88XX and CP-78XX
Figure 30.2 Cisco CP - Factory reset
- Press
Settings
button on the phone, marked as1
- Scroll down to
Device administration
. - Press
select
to enter into the administrator submenu. - Scroll down to
Factory reset
- Press
select
to perform the factory reset. - You will be prompted to confirm the action by pressing
ok
PAP2 Adapter
To perform factory reset of Cisco PAP2 adapter please connect analogue phone to the device and follow steps below:
- Dial
****
from your phone. - Dial
73738#
. - Dial
1
.