Note: you are viewing legacy manual.
Please click here for current version.
Aastra can be auto provisioned by VoIPstudio VoIP service. This greatly simplifies device deployment and configuration.
Note: if your phone was purchased from VoIPstudio, it has been already pre configured and there is no need to provision it. Please refer to Phone edit section to assign extensions. If your phone was not purchased from VoIPstudio, please perform a Factory Reset described in Factory Reset section above and Firmware upgrade.
You can obtain your phone IP by following the steps described in Find phone IP section above.
To auto provision Aastra phone login into web interface of the device and follow steps below:
System informationlink in the left sidebar.
MAC Addressinto a clipboard.
Configuration Serverlink in the left sidebar.
Resetlink in left sidebar.
After a short while your Aastra phone will reboot and obtain configuration data from VoIPstudio provisioning service.