Skip to content

Hardware Configuration - Factory Reset - Fanvil

Factory Reset for Fanvil

Factory reset for latest firmware phones

Hold down the OK button until the Factory Reset button appears then press OK to start reboot.

Factory reset from web interface

From the web interface:

  1. Navigate System > Configurations.
  2. From reset phone section.
  3. Click Reset button.

Fanvil factory reset on bootup

  1. Make sure your IP phone is completely turned off.
  2. Pres # Key.
  3. If you are using a X5S: press # after the Red Light blinks on Page-Switch key.
  4. If you are using other model than X5S: press # after the 2nd Red Light blinks on Power Indicator LED.
  5. You will then see the message “Post Mode” appears on your screen.
  6. Dial *#168
  7. After 5 seconds, you should see “Conf Reset” on your screen.
  8. Restart your IP phone and your phone will be reset to the factory settings.